Proeti > Bitumen & asphalts > Marshall Test > Additional 50 mm transducer
LOGOSINFOTO

Additional 50 mm transducer

BA120-13

For a double measurement of the vertical D301displacement of the specimen during the tensile splitting test.

Quote
Catalogue
Links of interest
Linkedin
Shopping Cart
365
    365
    Items
    Go/not go gauge for Ø10 mm orifice 
    Qty: 1
    Constant permeability cell Ø116 mm 
    Qty: 1
    Chattaway spatula 120 mm 
    Qty: 2
    Set of two dial gauges 10x0,01 mm 
    Qty: 1
    Extension rod for above 1 m long 
    Qty: 1
    Natural sand 300/150 microns ASTM (25 Kg) 
    Qty: 2
    Consolidation cell Ø112,80 mm specimen diameter 100,00 cm2 specimen tickness 25,00 cm2 
    Qty: 2
    Consolidation cell Ø71,40 mm specimen diameter 40,00 cm2 specimen tickness 20,00 cm2 
    Qty: 2
    Bench for up to 3 oedometers 
    Qty: 2
    Consolidation cell Ø50,47 mm specimen diameter 20,00 cm2 specimen tickness 20,00 cm2 
    Qty: 2
    Consolidation cell Ø75 mm specimen diameter 44,16 cm2 specimen tickness 20,00 cm2 
    Qty: 2
    Weight set 50 Kg 
    Qty: 2
    Consolidation cell Ø63,50 mm specimen diameter 31,67 cm2 specimen tickness 20,00 cm2 
    Qty: 2
    Bench for up to 1 oedomete 
    Qty: 2
    Consolidation cell Ø79,80 mm specimen diameter 50,00 cm2 specimen tickness 20,00 cm2 
    Qty: 2
    Glass plate 500x500x10 mm 
    Qty: 2
    Glass plate 105x50 mm according to NF P94-051 
    Qty: 2
    Ø1,00 mm hardened needle 
    Qty: 1
    Plastic mould Ø60-70x40 mm 
    Qty: 1
    100 g probe for gypsum tests 
    Qty: 1
    Needle for final setting Ø1,00 mm 
    Qty: 1
    Additional weight 700 g 
    Qty: 1
    Needle for final setting Ø1,13 mm 
    Qty: 1
    Plastic mould Ø70-80x40 mm 
    Qty: 1
    Conical penetration needle to make gypsum tests 
    Qty: 1
    Glass spheres, size 180/212 microns EN (5 Kg) 
    Qty: 2
    Natural sand 150/75 microns ASTM (25 Kg) 
    Qty: 2
    Deep cover search head 
    Qty: 2
    Narrow pitch search head 
    Qty: 2
    Short borehole probe 
    Qty: 2
    Long borehole probe 
    Qty: 2
    Filter disc 3000 g 
    Qty: 2
    Bowl and cover 3000 g 
    Qty: 2
    Bowl and cover 1500 g 
    Qty: 2
    Cutting edge Ø4” 
    Qty: 2
    Filter disc 1500 g 
    Qty: 1
    Rod guide - Scraper plate 
    Qty: 2
    Drill pin 
    Qty: 2
    Cutting edge Ø6” 
    Qty: 2
    Compaction permeameter Ø6” 
    Qty: 2
    Plein base and collar Ø6” for compaction tests 
    Qty: 2
    SU405-03 Mould with Ø4” lateral water inlet/outlet for permeability 
    Qty: 2
    Compaction permeameter Ø4” 
    Qty: 2
    Plein base and collar Ø4” for compaction tests 
    Qty: 2
    Mould with Ø6” lateral water inlet/outlet for permeability 
    Qty: 2
    Standard sand 25 Kg for sand replacementmethod 
    Qty: 2
    Proctor modified rammer 
    Qty: 2
    Proctor modified rammer 
    Qty: 2
    Ion exchange resin 500 g 
    Qty: 2
    5 m tubing Ø8 mm 
    Qty: 2
    Constant permeability cell Ø75 mm 
    Qty: 2
    Proctor standard rammer 
    Qty: 2
    Proctor standard rammer 
    Qty: 2
    Broaches for creating notches on "V" with depth 2 mm 
    Qty: 2
    Automatic specimen centering device 
    Qty: 2
    Broaches for creating notches on “U” with depth 5 mm 
    Qty: 2
    Manual notching device 
    Qty: 2
    Noise reduction cabinet 
    Qty: 2
    Digital manometer 1 kPa 
    Qty: 2
    Ec-tds conductivity meter 
    Qty: 2
    Weight 100 g to be placed over the glass plate 
    Qty: 2
    Extensibility device to check the elasticity of the mould 
    Qty: 2
    Two glass plates 50x50 mm to cover the mould 
    Qty: 2
    Water refrigerator system 
    Qty: 2
    Polythene pan 240x300x70 mm 
    Qty: 2
    Tubing and accessories to connect the air compressor 
    Qty: 2
    Vertical force testing device with load ring 
    Qty: 2
    Top penetration piston Ø150 mm 
    Qty: 2
    Hardened specimen cylinder with bottom plate Ø150 mm 
    Qty: 2
    Hollow mold to stabilize and to mature the simple Ø100 mm 
    Qty: 2
    Wheels (kit of 4) with brake 
    Qty: 2
    Filter paper for moulds Ø100 mm 
    Qty: 2
    Filter group 
    Qty: 2
    Filter paper for moulds Ø150 mm 
    Qty: 2
    Hardened specimen cylinder with holes for cold mix compaction Ø100 mm 
    Qty: 2
    Discs to make easier the handling of specimens Ø150 mm 
    Qty: 2
    Hardened specimen cylinder with holes for cold mix compaction Ø150 mm 
    Qty: 2
    Pneumatic automatic specimen extruder 
    Qty: 2
    Bench for lateral bearing of a weighting balance. 
    Qty: 2
    Balance integrated 30 kg x 6 g 
    Qty: 2
    Hardened specimen cylinder with bottom plate Ø100 mm 
    Qty: 2
    Hollow mold to stabilize and to mature the simple Ø150 mm 
    Qty: 2
    Placeholder
    Work top 
    Qty: 2
    Top penetration piston Ø100 mm 
    Qty: 2
    Discs to make easier the handling of specimens Ø100 mm 
    Qty: 2
    Vertical force testing device with digital dynamometer 
    Qty: 2
    Filling hopper 
    Qty: 2
    Placeholder
    Distance piece 50 mm for frames HR111...HR117 
    Qty: 2
    Upper tamper device 
    Qty: 2
    Rollers-holders (lowers only) 613 mm long 
    Qty: 2
    Rollers group upper and lower Ø40x160 mm 
    Qty: 2
    Upper tamper for flexural strength measurements 
    Qty: 2
    Rollers group upper and lower Ø40x613 mm 
    Qty: 2
    Waterproof immersion/penetration probe -60 a +400°C 
    Qty: 2
    Safe case to protect from impact and dirt 
    Qty: 2
    Waterproof surface probe -60 a +400°C for flat surfaces 
    Qty: 2
    Service case for thermometer and probes 
    Qty: 2
    Packing strips 4x10x350 mm 
    Qty: 2
    Load plate Ø600 mm in aluminum with reinforced bars 
    Qty: 2
    CONFIGURACIÓN DE BASTIDOR CBR 
    Qty: 2
    CONFIGURACIÓN DE BASTIDOR TRIAXIAL 
    Qty: 2
    Placeholder
    CONFIGURACIÓN DE BASTIDOR EDÓMETRO 
    Qty: 2
    Support frame for vibrating hammer 
    Qty: 2
    Rammer Ø146 mm head 
    Qty: 2
    Load plate Ø600 mm 
    Qty: 2
    Load plate Ø760 mm 
    Qty: 2
    Load plate Ø450 mm 
    Qty: 2
    Marshall mould Ø 4" 
    Qty: 2
    Lottman Tensile Splitting device 
    Qty: 2
    Additional 50 mm transducer 
    Qty: 1
    Two 10 mm transducers 
    Qty: 1
    Device to fix the displacement transducer/dial 
    Qty: 2
    Leutner direct shear head 
    Qty: 2
    Placeholder
    Bench for lateral bearing of digital display 
    Qty: 2
    Splitting tensile device 
    Qty: 2
    Spacers for Ø100 mm specimens with Leutner head 
    Qty: 2
    Software for consolidation tests 
    Qty: 2
    Packing strips 4x15x350 mm 
    Qty: 2
    Penetration probe Ø3x120 mm up to 900°C 
    Qty: 2
    Air probe Ø3x245 mm up to 300°C 
    Qty: 2
    Protective cover for thermopar 
    Qty: 2
    Surface probe Ø16x260 mm up to 650°C 
    Qty: 2
    Automatic dispenser 0-10x0,1 ml 
    Qty: 2
    Grooving tool AASHTO T79 
    Qty: 2
    Grooving tool NF P94-051 
    Qty: 2
    Grooving tool ASTM D4318 
    Qty: 2
    Hand extruder for Ø38 mm sample tubes 
    Qty: 2
    Calibration squares according to EN angle of 0,82° 
    Qty: 2
    Calibration squares according to ASTM angle of 1,16° 
    Qty: 2
    Briquette mould 
    Qty: 2
    Briquette mould 
    Qty: 2
    Load cell 50 N 
    Qty: 2
    Base plate for ductility briquette moulds 
    Qty: 2
    Briquette mould 
    Qty: 1
    Cylinder Ø200x400 mm 
    Qty: 2
    Cylinder Ø200x154 mm 
    Qty: 2
    Bolas Ø18 mm 
    Qty: 2
    Stainles steel spheres Ø30 mm 
    Qty: 2
    Stainles steel spheres Ø10 mm 
    Qty: 2
    Cylinder carrier for Ø150 - Ø160 mm specimens 
    Qty: 2
    Rock cradle 
    Qty: 2
    Hot plate with magnetic stirrer 
    Qty: 2
    Pouring plate 50x75 mm 
    Qty: 2
    Mirror to facilitate the height adjustment of the cone 
    Qty: 2
    Sample cup Ø55x40 mm 
    Qty: 2
    Test gauge 
    Qty: 2
    Weight 320 g to be added to the 30° cone (shear strength) 
    Qty: 2
    Test cone 60° angle and 60 g weigh 
    Qty: 2
    Test gauge 
    Qty: 2
    Sieve Ø150 mm mesh size 1,5 mm 
    Qty: 2
    Interchangeable nozzle Ø13 mm 
    Qty: 2
    Thermometer +0 to +55ºC (NF T66-020) 
    Qty: 2
    Kohlraush calibration flask 200 ml 
    Qty: 2
    Filter screen ASTM Nº50 
    Qty: 2
    4 Lineal transducer 10 mm with supports for AR263 
    Qty: 2
    Pavigres tile 
    Qty: 2
    STD-P Verification Surface 
    Qty: 2
    Mounted Shoe 96 
    Qty: 2
    Sample Holder 
    Qty: 2
    Mounted Shoe 57 
    Qty: 2
    Pink Lapping Film 
    Qty: 1
    Marshall filter paper 
    Qty: 2
    Console for housing the pump unit 
    Qty: 2
    Two way hydraulic valve 
    Qty: 2
    Console Housing pump unit 
    Qty: 2
    Constant level tank 
    Qty: 2
    Metallic molds 
    Qty: 1
    Metallic molds 
    Qty: 1
    Mirror for an easier setting of the needle 
    Qty: 2
    Long penetration needle not hardened 52,5 mm 
    Qty: 2
    Hardened steel needle 42,5 mm with UKAS verification 
    Qty: 1
    Transfer dish, made of glass with support 
    Qty: 2
    Thermostatically water bath for penetrometer 
    Qty: 2
    Standard penetration cone Ø65 mm 
    Qty: 2
    Water bath dish with thermostatic coil 
    Qty: 2
    Long penetration needle hardened 52,5 mm 
    Qty: 2
    Sample cup aluminiun made Ø55x40 mm 
    Qty: 2
    Penetration ball 
    Qty: 2
    Hardened steel needle 42,5 mm with EN1426 verification 
    Qty: 2
    Three gang mould 50x50x50 mm 
    Qty: 2
    British Gypsum Crystacal plaste (25 kg bag) 
    Qty: 2
    Aluminium template 
    Qty: 2
    Safety stop door switch 
    Qty: 2
    Safety guard 1500 kN (ASTM) for frame machines HR051-HR057 
    Qty: 2
    Safety guard 3000 kN (EN) for frame machines HR021-HR027 
    Qty: 2
    Bench for concrete testing machines 
    Qty: 2
    Safety guard 2000 kN (ASTM) for frame machines HR061-HR067 
    Qty: 2
    Safety guard 2000 kN (EN) for frame machines HR011-HR017 
    Qty: 2
    Grid shelf for laboratory oven 100 L 
    Qty: 1
    Grid shelf for laboratory oven 220 L 
    Qty: 1
    Grid shelf for laboratory oven 750 L 
    Qty: 1
    Grid shelf for laboratory oven 440 L 
    Qty: 1
    Friction Criggion Stone ungraded (25 Kg bag) 
    Qty: 2
    Flour Emery “Original” (5 Kg pack) 
    Qty: 2
    Control stones ungraded (20 Kg bag) 
    Qty: 2
    Flour Emery (5 Kg pack) 
    Qty: 2
    Corn Emery (25 Kg pack) 
    Qty: 2
    Carrying case 
    Qty: 2
    Adhesion test aluminium disc Ø50 mm 
    Qty: 2
    Cylindrical ring Ø50 mm 
    Qty: 2
    Acrylic adhesive glue 
    Qty: 2
    Drill bit with centering bit Ø50 mm for surface preparation 
    Qty: 2
    Software to download test results to PC 
    Qty: 2
    Adhesion test aluminium square 50x50 mm 
    Qty: 2
    Adhesion test aluminium disc Ø50 mm 
    Qty: 2
    Adhesion test aluminium disc Ø20 mm 
    Qty: 2
    Drill bit with centering bit Ø20 mm for surface preparation 
    Qty: 2
    Cubic mould 70.7 mm 
    Qty: 2
    Three gang mould 70,7x70,7x282,8 mm 
    Qty: 2
    Three gang mould 40x40x160 mm 
    Qty: 2
    Soundproofed cabinet 
    Qty: 2
    Three gang mould 40x40x160 mm 
    Qty: 2
    Large radius arm 
    Qty: 2
    Stirrup measuring bender for bars up to Ø12 mm 
    Qty: 2
    Circular stirrup bender for bars from Ø6 up to Ø25 mm 
    Qty: 2
    Large radius wheels for arm 
    Qty: 2
    Lower and upper plate with seat ball 
    Qty: 2
    Withdrawal tube 
    Qty: 2
    Filter funnel with filter ring mesh 
    Qty: 2
    4 Dial gauges 10x0,002 mm with supports for AR261 
    Qty: 2
    Mould former to prepare the specimen 
    Qty: 2
    Speedy Calibration kit 
    Qty: 2
    Clamping device for HR388 and HR389 
    Qty: 2
    Pedal switch 
    Qty: 2
    Thermostat analogic system for HR403 
    Qty: 2
    Sumersible water circulating pump 
    Qty: 2
    Thermostat analogic system for HR401 and HR405 
    Qty: 2
    Inserts to measure shrinkage in mould HR491 
    Qty: 2
    Calibration anvil 
    Qty: 2
    Lining paper 370x200 mm 
    Qty: 2
    Placeholder
    Cabinet with aspirator 
    Qty: 2
    Nylon tube Ø4 mm (20 m) 
    Qty: 2
    Gas jar to determine the specific gravity of soils 
    Qty: 2
    Grooving tool NF P94-051 
    Qty: 2
    Software Soilmatic para edómetro 
    Qty: 1
    CBR Piston 
    Qty: 1
    Upper and lower compression platens Ø100 mm 
    Qty: 2
    Upper and lower compression platens Ø165 mm 
    Qty: 2
    Rotating shelf for the determination of thin film 
    Qty: 2
    Rotating shelf for the determination of loss on heating 
    Qty: 2
    Rotating shelf for the determination of thin film 
    Qty: 2
    Flaring tool 
    Qty: 2
    Grease pump 
    Qty: 2
    Vaseline oil (1000 ml) 
    Qty: 2
    Silicon grease (1 kg) 
    Qty: 2
    Terminal for connection tube 
    Qty: 2
    Customized colour for triaxial cell 
    Qty: 2
    Heating oil 10 L 
    Qty: 2
    Capping Compound 
    Qty: 2
    Safety guards in compliance with CE Directive 
    Qty: 2
    Bench to hold the compression frame 
    Qty: 2
    Distance piece 50 mm 
    Qty: 1
    Distance piece 25 mm 
    Qty: 2
    Cup with orifice Ø2 mm 
    Qty: 2
    Cup with orifice Ø10 mm 
    Qty: 2
    Go/not go gauge for Ø4 mm orifice 
    Qty: 2
    Ball valve Ø4 mm 
    Qty: 2
    Cup with orifice Ø4 mm 
    Qty: 2
    Ball valve Ø10 mm 
    Qty: 2
    Go/not go gauge for Ø2 mm orifice 
    Qty: 2
    Ball valve Ø2 mm 
    Qty: 2
    Filling Hopper to the mould 
    Qty: 2
    Brass Flow Calliper 
    Qty: 2
    Flow Calliper 
    Qty: 2
    Weighting and filling container 
    Qty: 2
    Separate control panel with timer 
    Qty: 2
    Rubber bung for the gas jar 
    Qty: 2
    Cradle for holding specimens 
    Qty: 2
    Loading device with 15 kg drop weight 
    Qty: 2
    Thermal printer in aluminium case 
    Qty: 2
    Transport trolley telescopic 
    Qty: 2
    Magnetic stand for safe storage of the loading device during alignment of the bearing plate 
    Qty: 2
    WebApp license 
    Qty: 2
    Sample extractor piston 
    Qty: 2
    Calibration device for Benkelman beam 
    Qty: 2
    Carbide Ampoules 
    Qty: 2
    Wire basket double cloth 0,063 and 0,4 mm 
    Qty: 2
    Wire basket cloth 0,4 mm 
    Qty: 2
    Wire mesh with ceramic centre150x150 mm 
    Qty: 2
    Wire mesh with ceramic centre200x200 mm 
    Qty: 1
    Wire mesh with ceramic centre300x300 mm 
    Qty: 1
    Mould with 4 truncated conical holes 140x140x19 mm 
    Qty: 2
    Double ended, brass and nylon bristle 
    Qty: 2
    Hollow punch 60x60 mm 
    Qty: 2
    Tamper 100x100 mm 
    Qty: 2
    Hollow punch Ø50 mm 
    Qty: 2
    Tamper Ø100 mm 
    Qty: 2
    Hollow punch 100x100 mm 
    Qty: 2
    Hollow punch 100x100 mm 
    Qty: 2
    Hollow punch Ø50 mm 
    Qty: 2
    Hollow punch Ø60 mm 
    Qty: 2
    Software for Soilmatic odometer 
    Qty: 2
    Tamper 60x60 mm 
    Qty: 2
    Hollow punch Ø60 mm 
    Qty: 2
    Hollow punch Ø100 mm 
    Qty: 2
    Hollow punch Ø100 mm 
    Qty: 2
    Tamper Ø50 mm 
    Qty: 2
    Tamper Ø60 mm 
    Qty: 2
    Consolidation cell Ø63,50 mm specimen diameter 31,67 cm2 specimen tickness 20,00 cm2 
    Qty: 2
    Consolidation cell Ø50,47 mm specimen diameter 20,00 cm2 specimen tickness 20,00 cm2 
    Qty: 2
    Consolidation cell Ø71,40 mm specimen diameter 40,00 cm2 specimen tickness 20,00 cm2 
    Qty: 2
    Consolidation cell Ø79,80 mm specimen diameter50,00 cm2 specimen tickness 20,00 cm2 
    Qty: 2
    Consolidation cell Ø112,80 mm specimen diameter 100,00 cm2 specimen tickness 25,00 cm2 
    Qty: 2
    Consolidation cell Ø75 mm specimen diameter 44,16 cm2 specimen tickness 20,00 cm2 
    Qty: 2
    Diaphragm pump 2,4 bar 
    Qty: 2
    Reference marble sample 
    Qty: 2
    Corundum abrasive grain 80 (25 kg bag) 
    Qty: 2
    Soaking tank Ø150x120 mm 
    Qty: 2
    Filter paper Ø150x120 mm 
    Qty: 2
    Cutting edge Ø150x120 mm 
    Qty: 2
    Straight edge 300 mm 
    Qty: 2
    Strain gauge, 60 mm 
    Qty: 2
    Interface module to connect up to 4 strain gauges 
    Qty: 2
    Strain gauge, 30 mm 
    Qty: 2
    Strain gauge, 10 mm 
    Qty: 2
    Strain gauge, 120 mm 
    Qty: 2
    Strain gauge, 20 mm 
    Qty: 1
    Flat bar specimen (14 pcs) 
    Qty: 2
    Round copper bar specimens Ø6 mm (14 pcs) 
    Qty: 2
    Round bar test specimens Ø6 mm, aluminium made (14 pcs) 
    Qty: 2
    Round bar test specimens Ø6 mm, copper made (14 pcs) 
    Qty: 2
    Educational device for tensile test 
    Qty: 2
    Educational device for compression test 
    Qty: 2
    Round bar test specimens Ø6 mm, brass made (14 pcs) 
    Qty: 2
    Educational device for Brinell hardness test 
    Qty: 2
    Flat bar test specimens, different materials (14 pcs) 
    Qty: 2
    Educational device for shear test 
    Qty: 2
    Round bar test specimens Ø6 mm, bronze made (14 pcs) 
    Qty: 2
    Round bar test specimens Ø6 mm, stainless steel made (14 pcs) 
    Qty: 2
    Educational device for flexure test 
    Qty: 2
    Mould with 4 truncated conical holes 140x140x13 mm 
    Qty: 2
    Mould with 4 truncated conical holes 140x140x6,3 mm 
    Qty: 2
    Mould with 4 truncated conical holes 140x140x10 mm 
    Qty: 2
    Soundproofed safety cabinet 
    Qty: 2
    Set of 12 abrasive charges 
    Qty: 2
    Set of 12 abrasive charges 
    Qty: 2
    Triaxial cell 1700 kPa 
    Qty: 2
    Load spreader 
    Qty: 2
    Two temporary supports Ø120 mm 
    Qty: 2
    Penetration piston Ø80 mm 
    Qty: 2
    Penetration piston Ø120 mm 
    Qty: 2
    Penetration piston grooved Ø120 mm 
    Qty: 2
    Demoulding cylindrical container Ø80 mm 
    Qty: 2
    Demoulding cylindrical container Ø120 mm 
    Qty: 2
    Two temporary supports Ø80 mm 
    Qty: 2
    Upper/Lower piston Ø80 mm 
    Qty: 2
    Penetration piston grooved Ø80 mm 
    Qty: 2
    Upper/Lower piston grooved Ø120 mm 
    Qty: 2
    Upper/Lower piston grooved Ø80 mm 
    Qty: 2
    Upper/Lower piston Ø80 mm 
    Qty: 2
    Set of 4 jaws, upper and lower 
    Qty: 2
    Device for tensile calibration test 
    Qty: 2
    Extensometer for round specimens from Ø18 a 25 mm 
    Qty: 2
    Extensometer for flat specimens, width max. 25 mm; thickness max. 10 mm. 
    Qty: 2
    Extensometer for round specimens from Ø10 a 19 mm 
    Qty: 2
    Extensometer for round specimens from 4,5 to 11 mm 
    Qty: 2
    Set of 4 jaws, upper and lower 
    Qty: 2
    Electronic extensometer 
    Qty: 2
    Upper platen for compression tests on concrete 
    Qty: 2
    Safety guards to CE Directive 
    Qty: 2
    Soft hair brush 
    Qty: 2
    Soft hair Brush, Ø3 mm BS 812 
    Qty: 2
    Bristle Brush, soft hair, Ø35 mm 
    Qty: 2
    Hard sieve Brush 
    Qty: 2
    Hard nylon sieve Brush, flat 60 mm 
    Qty: 2
    Request a quote