Digital Marshall load frame
BA121
EN 12697-34, 12697-23, 12697-12 | BS 598:107 |
ASTM D6927, D5581, D1559 | AASHTO T245 | NF P98-251-2
The Marshall frame are bench-mounted, with a motor and worm gear housed within the base unit. Easy to use, it is designed to operate with the minimum of maintenance.
Platen rate is 50,8 mm/min also maintained under load through to an overpowered electric motor.
The load is measured by an 50 kN cell with high precision strain transducers; the flow is measured by an electronic displacement transducer 50 mm stroke ± 0,1% linearity.
A digital display unit with microprocessor measures and displays at the same time the stability in kN and the flow in mm with peak hold features, with the possibility to transfer them to a PC and a printer through a RS232 port.
Supplied with a stability mould.
Power supply: 230 V | 50 Hz | 900 W
Accessories and Parts
BA120-01 | Marshall mould Ø 4″ | |
BA120-11 | Splitting tensile device | |
BA120-12 | Two 10 mm transducers | |
BA120-13 | Additional 50 mm transducer | |
BA120-15 | Lottman Tensile Splitting device | |
BA120-21 | Leutner direct shear head | |
BA120-22 | Spacers for Ø100 mm specimens with Leutner head | |
MG010-04 | Bench for lateral bearing of digital display | |
MG010-82 | Device to fix the displacement transducer/dial |