A consolidated drained triaxial test can take days, and an oedometer test a week of load stages. With Soilmatic automatic soil testing equipment, the computer applies the loads and pressures, logs the readings and moves from one stage to the next without the operator: oedometer, direct shear, triaxial frame, pressure-volume controllers and triple frame. Tell us which tests you run and we will propose a configuration.
| Equipment | Tests | Standard (product page) |
|---|---|---|
| Soilmatic oedometer | Consolidation in load stages, controlled from the computer | BS 1377-5, ASTM D2435, AASHTO T216 |
| Soilmatic direct shear | Consolidation and drained, undrained and residual shear | ASTM D3080, AASHTO T236, BS 1377-7 |
| Soilmatic triaxial frame | UU, CU and CD from start to finish, with no operator intervention | BS 1377-8 |
| 1, 2, 3 or 4-way pressure-volume controllers | Cell pressure, back pressure, pore pressure and volume change | — |
| Soilmatic triple frame | Three customisable test stations in a single frame | — |
| Conventional equipment | Soilmatic | |
|---|---|---|
| Loads and pressures | Applied and adjusted by the technician | Controlled by the computer |
| Readings | By hand or with data acquisition | Continuous, automatic logging |
| Stage changes | Someone has to be present | Automatic, including nights and weekends |
| Suitable for | Few tests or teaching | Laboratories with high volumes or long tests |
Conventional equipment (front-loading oedometer, triaxial cells, pressure panels) is in soil mechanics.
To get a price, click Budget on each product page and send one request with everything you need. If you would rather talk to us, write to us or call +34 916 28 29 40.
Consolidation tests and drained triaxial tests last for days. Automated, they run 24 hours a day without anyone changing loads or valves, are repeated in exactly the same way every time and leave a complete record. The technician prepares the specimen and reviews the results.
The sample is placed in a box split in two, a vertical load is applied and one half is displaced relative to the other while the force is measured. Repeating it under several loads gives the cohesion and the angle of shearing resistance (EN ISO 17892-10).
A pressure applied to the pore water of the specimen to dissolve any remaining air and saturate it fully. That way the pore pressure and volume change measurements are reliable. It is controlled by one of the pressure-volume controllers.
The strength a clayey soil retains after large displacements, when the particles have aligned along the failure plane. It is obtained with repeated shear cycles, and it is what counts in old landslides.
All the soil testing equipment is in soils.