PEDESTAL BASE
Used to adapt the triaxial cell base to different sample sizes. Supplied with a solid disc for undrained tests.
TOP PLUG
Used to apply the load evenly across the cross-sectional area of ​​the sample when drainage from the top is required.
POROUS STONE
Acts as a filter to ensure that water flow through the sample is evenly distributed across the cross-sectional area. Two are required, one for the top of the sample and one for the base.
PERSPLEX FLAT DISC
Used to replace the porous discs in undrained tests. They are 10 mm thick, and two are required per cell.
RUBBER MEMBRANE
Provides a watertight protective covering around the sample. Supplied in packs of 10.
SEALING RINGS
Used to seal the membrane to the pedestal and the top plug at each end of the sample. Supplied in packs of 10.
MEMBRANE TENSIONER
Used to stretch the membrane so it can be easily placed over the sample without disturbing it.
SEALING RING PLACEMENT TOOL
Used to mount the seals without disturbing the sample.
SPLIT MOLD
A piece of equipment specially designed for use in the preparation of non-cohesive soils.
SPLIT MOLD
Used to trim the ends of undisturbed soil samples.
SIDE DRAINAGE FILTER PAPER
Used as side drains when samples have low permeability. They are especially useful for saturating clays before consolidation and shearing.
Pack of 50.
BASE FILTER PAPER
To prevent soil particles from clogging the porous stones during the test.
STAINLESS STEEL DIE RING
For cutting cohesive soils to the correct diameter.
Made of stainless steel with a cutting edge.
EXTRACTOR PIPER
For extracting the sample from the die ring.